By many metrics, 2020 was a difficult year. I won’t sugarcoat the fact that certain parts of the aviation industry in our state and throughout the country have seen significant negative impacts from the COVID-19 pandemic. That being said, I believe growing positive trends and an approved vaccine provide us with reasons to start the new year with a positive outlook. I also acknowledge that we must have an awareness that we are entering a time where continued perseverance is required.

A new legislative session has arrived for us in North Dakota and community leaders around the state will be hard at work discussing how to best position our state over the next biennium. As requested by the governor, the North Dakota Aeronautics Commission (NDAC) has successfully re-prioritized our budget and I believe that our initial agency bill provides a strategically sound starting point. I look forward to having conversations with our elected leaders to discuss our industry’s current situation and I will work hard to advise on an appropriate pathway that will support our airports and aviation industry as we recover from the pandemic. 

I want to encourage all of you to stay engaged with the legislative process by keeping in touch with your legislators and by utilizing the Legislative Council bill tracking system, which can be found at www.legis.nd.gov. As legislation comes forward regarding elements that have a factor in aviation, I will be in direct communication with the North Dakota Aviation Association (NDAA) and the Airport Association of North Dakota (AAND) as we work through any critical issues. I also encourage you to contact me to share any concerns or relevant information that you may have on pending legislation. 

Outside of the legislative session, the NDAC is also continually working with our federal funding partners to fully understand their grant programs and eligibility criteria, as we want to have high priority shovel-ready projects ready to go as funding becomes available. Though we currently do not know what our future has in store, we need to make sure that we are not complacent and that we position ourselves to be prepared to accept any challenges or opportunities that arise in the near term. 

I also hope that you are able to join us March 8-9 for the virtual FLY-ND conference. As always, your NDAA board members and volunteers have been hard at work preparing an exceptional program for all aviation enthusiasts to enjoy. Though we are unable to come together in person this year, I sincerely hope you are able to take the time to celebrate aviation with us at our state’s first ever virtual conference.

Wishing you smooth flying, 

Kyle

The theme for the 2019 Upper Midwest Aviation Symposium was “Building a Community of Aviation.” As the COVID-19 pandemic continues to impact everyone around the globe, I am constantly reminded of the tremendous aviation community we have here in North Dakota. I also believe the number one factor impacting student success in schools is having a relationship with a positive role model or mentor. The stronger the relationship a student has with a positive role model, the more likely they are to succeed. I believe this also applies to us in our professional lives or while flying for recreation. 

Building a personal learning network is one helpful way to grow in the aviation industry. I have found that one of the easiest ways to develop this network is through memberships in professional organizations. These organizations accomplish many goals, one of which is bringing members together to learn. The North Dakota Aviation Association (NDAA) does this through media such as the Quarterly, social media and, as we talk about every winter, the upcoming FLY-ND conference. Though we will not gather together in person this year, the virtual conference will present an opportunity to meet and network with other like minded individuals. I encourage you to attend this year’s virtual conference which is FREE for all NDAA members. You really can’t ask for a better deal than that! 

Through my role at the North Dakota Aeronautics Commission (NDAC), I continue to work to develop the aviation community by building relationships with the various aviation groups around the state and throughout the country. At the NDAC we work hard, along with the Airport Association of North Dakota (AAND), to ensure airports are kept safe and well maintained. Planning projects becomes a bit like a jigsaw puzzle, while we work with stakeholders to leverage local, state, and federal funds to ensure high priority projects are completed on time. We also work with pilots and aircraft owners through our Passport Program to learn more about the needs of airports around the state. 

In regards to aviation education, I work consistently with the high school Career and Technical Education (CTE) programs around the state, as well as our air museums, to develop high quality educational programming for youth of all ages. We also help with funding needs for these programs through educational grants. Recently, we awarded educational grants to help fund simulators at three North Dakota airports. These simulators are available for low cost or free-of-charge in the cities of Mandan, Mohall, and Hillsboro. 

I would like to encourage you to continue building your personal learning network through networking and membership in professional organizations. If you are not already a member, consider joining the NDAA, where you will gain access to this year’s virtual conference among other benefits. In addition, the Professional Aviation Maintenance Association (PAMA), the AAND, and the Experimental Aircraft Association (EAA) are local organizations which can help you learn and network. Both statewide and national aviation organizations have social media presences as well. Consider joining, following, liking, and contributing to your personal learning network. 

Mike McHugh, Aviation Education Coordinator 

North Dakota Aeronautics Commission

701-328-9650 | mmchugh@nd.gov

 By The Staiger Consulting Group

When 2020 recently came to a close, I bid it a not-so-fond farewell. I, like many of you, am glad to be looking at last year through a rearview mirror. My focus for 2021 is one of hope and optimism. Although 2020 was one for the record books, I found light in the darkest of times amongst our circle of family and friends, essential workers, neighbors, teachers, and even strangers. I truly believe that once we are through this pandemic, our community will be stronger, people will embrace one another, support one another, and look at the world through a different lens. We came together as a family, a neighborhood, and community in the face of this pandemic. It is in that hope for the future and the fact that it’s a new year, I think now is the best time to examine what’s in front of us and if we want to be part of something bigger than ourselves. 

This year, I decided not to make any resolutions; I’m not adding to my plate or to my to-do list. Instead, I am choosing to narrow my focus on what’s important and my role in my home, my family,and my community. I encourage you, as well, to consider what role aviation plays in your life. Is it a profession? A hobby? A passion? An escape? Whatever it means to you, I know that if you have opened this publication and made it to this article, you have a vested interest and care or concern for the industry. Perhaps it’s one small area, or maybe it’s aviation in its entirety. I want you to know that the North Dakota Aviation Association (NDAA) and it’s passionate board members, volunteers, and staff care deeply about all aspects of aviation. 

The Merriam-Webster Dictionary defines an association as:

(often in names) a group of people organized for a joint purpose.

An organization of persons having a common interest: SOCIETY.

Our Association clearly understands that each sector of the industry needs each other, as we cannot have one without the other. Some of you may already know this, but the NDAA was founded in 1983 by six aviation organizations, interested in promoting aviation in the state and presenting their concerns before the government and the general public. It was founded with the notion that solutions to problems facing aviation can be best served by consolidating and working together, rather than struggling as independent groups. The NDAA seeks to serve aviation professionals by providing a forum for the exchange of information, ideas, and experience among their peers: pilots, agricultural operators, airport managers, Fixed Base Operators, aviation mechanics, educators,and aviation museums. By combining our talents and resources, we are set to explore answers to the most pressing issues of today to ready ourselves for the exciting aviation world of tomorrow, all while having fun in the process and networking with like-minded individuals! 

Further explore your passion for aviation through your membership in the NDAA. Membership means that you too believe in this community of aviation and you have a voice in the direction of the industry. We are in this together, we are a community who works together to accomplish so much and affect change. The dynamics and vision of our organization are focused on preserving the past, embracing the present, and preparing a path for the future of the industry. It’s easy to see the depth and importance of the North Dakota Aviation Association. If you are considering joining, I encourage you to check it out, come for the education, networking, and preservation and advancement of the industry. If you simply believe in the mission and vision of what we do, now is a great time to join to make a difference in the community of aviation.

I look forward to your involvement and your impact on the future. 

The North Dakota Aviation Hall of Fame committee announces that William A. (Bill) Beeks has been selected for induction into the state’s Aviation Hall of Fame. Bill will join the prestigious aviation hall of fame group that currently includes 45 other individuals who have all had a significant impact to the growth, development, and promotion of aviation in North Dakota. For more information on the North Dakota Aviation Hall of Fame, visit www.fly-nd.com/HoF.

Bill Beeks was born January 21, 1941 in Bismarck, North Dakota. In 1957, he completed his first flight on his 16th birthday and moved on to earn his private pilot’s license at the age of 17. Bill grew up in Washburn, North Dakota and after his High School graduation in 1959, he continued his education at the University of North Dakota and received a Bachelor of Science in Industrial Arts. 

Bill returned to Washburn in 1967 to assist his father, Clifford H. Beeks with their family business, Central Flying Service. The business was incorporated in 1969 and Bill worked hard to eventually purchase and become the primary owner. He married Mary Ann Guenthner on July 26, 1969, and together they raised their daughter, Lara. During this time, Bill began his many years of working in North Dakota as a flight instructor, aircraft mechanic, aircraft inspector, and aerial applicator. 

Whenever friends and family would visit Washburn, Bill took time to give them an aerial tour of the area and share his love for North Dakota, the Missouri River, and its rich history of the Lewis and Clark Expedition. In the 1980’s, Bill flew for the U.S. Army Corps of Engineers and the Civil Air Patrol, where he helped to gather counts of campers and boats on Lake Sakakawea and the Missouri River. He also provided critical surveillance for area storm damage, range fires, and ice jams.

Bill served as the manager of the Washburn Airport for many years and was well-known around the area for his love of aviation and the services that he provided. His desire to improve the Washburn Airport prompted him to lead the effort to successfully advocate for the construction of a new concrete runway which occurred in 2002. 

Bill was active in many different community and church organizations but was especially involved in the state’s aviation-related organizations, where throughout the years he served in multiple leadership roles. His early and active participation with the North Dakota Agricultural Aviation Association and the Airport Association of North Dakota led to many positive evolutions within both organizations as they matured. Bill also volunteered his time to act as a lobbyist for the aviation community, where he would represent the best interests of the industry during multiple state legislative sessions.

Bill had a passion for his local community that was hard to match, and his sense of citizenship led to help place a small North Dakota farming community on the map. Bill will always be remembered for his love of aviation and his work to tirelessly show others that the front door of any community can truly begin - at the airport. 

Bill will be honored at the upcoming Fly-ND Virtual Conference that will take place March 8-9, 2021. To find more information on the virtual conference, visit: www.fly-nd.com/events/Conference. Tentative plans are also being made for an in-person summer induction ceremony and information regarding that event will be provided at a later date.

Questions can be directed to the North Dakota Aeronautics Commission at 701-328-9650. 

Carol on wing of the Piper Archer II at a fuel stop enroute to Florida, October 1976. The brown bag was full of Twizzlers.

By Rob Spiekermeier 

Carol and I were married Saturday evening, October 16, 1976, at St. Patricks’ Church in Enderlin, ND. On Sunday, we drove to Valley City Municipal Airport in light snow flurries and cold. On the ramp was a nearly-new Piper Archer II Airplane that Larry Lindemann had serviced and fueled earlier that morning. With it, he had left a note wishing us a safe and fun trip. I did my pre-flight, checked fuel and oil as Carol secured our baggage. I called Flight Service and checked weather and winds aloft enroute. Earlier that year, I had earned my commercial license on Carol’s birthday, March 17. I had considerable time in this aircraft. It was fully equipped for IFR flight, we were ready to go!

We blew out of there down 3-1 into light snow and wind, it was 24 degrees. We turned southeast climbing steadily and flew out of the snow into clear skies before we grazed the edge of South Dakota. I leveled and stabilized the craft at 9,500 feet and engaged the autopilot. This plane had a full panel and the latest avionics of the era. As I recall, it had two quality Nav-Com radios, Automatic Direction Finding (ADF), digital Distance Measuring Equipment (DME), a transponder, an Emergency Locator Transmitter (ELT), and a good Exhaust Gas Temperature (EGT) display. It was a comfortable, quiet, dependable aircraft. I only wished it had retractable wheels.

I was busy dialing in VOR stations, trimming the plane, leaning the mixture, and we had a nice tailwind at 9,500 feet. I had all the avionics humming and autopilot engaged, when Carol asked if I would mind if she took a little nap? “Sure,” I said, thinking about her big day yesterday. She folded her arms, leaned against the window, and fell asleep. Carol was a beautiful young woman with long dark brown hair that fell below her shoulders and eyes you could drown in. One of her special qualities was that she slept beautifully; her face was relaxed and peaceful, she was stunning!

That’s when it happened; I looked over at her, the brilliant afternoon sun reflected off the wing, diffused slightly through the plexiglass, sparkling through her long hair. The effect was a heavenly glow about her face. Her beauty was overwhelming to me at that instant, she was my best friend, now my wife, and I loved her so much! I thanked God right then for where we were, for my blessings, and her.

Here I am 44 years later, and this memory is still as vivid as that day so long ago. Carol died on a clear sunny morning on February 25, 2020, in our home with me by her side. Although cancer had consumed her, she died in no pain and was at peace with God. The remarkable thing was her face was just like that day in the sky when she was 18 years old. She was even more beautiful now and I loved her so much more! This was surely God’s handiwork now as it was way back then.

I never told her or anyone else about this memory before; now, my grief has inspired me to honor her with this poem.

God’s Grace at 95 Hundred Feet

She was only eighteen years young, girl so sweet,

Wed on Saturday, Sunday in snow down 3-1 we sped.

Lifting gently, south towards Florida’s warmth we flew,

Climb mechanical bird, leveled at 95 hundred feet.

The Lycoming’s reliable drone, the rush of the air,

Pointers confirm our course steady and true.

New young couple very at ease in God’s domain,

My glance caught her asleep, with nary a care!

Air so clean, that only a pilot can see,

Brilliant west sun, glistening off the wing,

Sparkled through her lovely long dark hair,

God’s light revealed, that girl was the world to me!

Lord protect us from the many perils above,

Thank you God for the gift of flight.

Pilots do get just a little bit closer to thee,

Help me God, to give you and her my love!

Carol, flying with the angels.

              All my love! Rob 8-1-2020

Dana (Paul) Lindemann (left), Carol (Rob) Spiekermeier (center), Dani (Jarrod) Lindemann (right) at the shop in Valley City a few years ago. Three women with time in the air!

2021 North Dakota Aviation Association Fly-ND Virtual Conference will be held March 8-9, 2021. Join us virtually this year to:

•  Learn from industry leaders

•  Networking

•  Make Connections

•  Associations annual business meeting –  Learn more about the association and member benefits 

•  IA Renewal credits

Dick VanGrunsven – Founder of Van’s aircraft

NDAA Members attend the 2021 Fly-ND Virtual Conference for FREE!

Did you know that both the Federal Aviation Administration (FAA) and the Mayo Clinic recently launched aviation podcasts?

The FAA’s new podcast, “The Air Up There,” is a show for ““anyone who is interested in learning more about aviation — whether you’re an aviation geek (av geek, for short) like us or just getting started,” FAA officials say. The podcast covers all things aviation, from airlines to general aviation to drones.

The Mayo Clinic’s podcast, “Clear Approach,” aims to provide health information related to FAA medical certification. It is designed for pilots to ask Aerospace Medicine experts questions about medical conditions and medications pertinent to certification issues. The podcast is hosted by Dr. Greg Vanichkachorn, Senior Associate Consultant in Mayo Clinic’s Division of Preventive, Occupational and Aerospace Medicine.

You can listen to the podcasts on popular podcast platforms or online: 

The Air Up There:

www.faa.gov/podcasts

Clear Approach: 

www.mayoclinicclearapproach.blubrry.net

Eloise Ogden/MDN Several of the World War II planes are lined up in front of the Dakota Territory Air Museum in Minot. The planes are, from the left, “Lope’s Hope 3rd, “Miss Kitty” and “Little Horse, all P-51s, and the British Spitfire. The Minot museum has the largest collection of World War II planes in one spot in central United States.

By Eloise Ogden, Regional Editor

The largest collection of World War II planes in one spot in central United States is located here in Minot at the Dakota Territory Air Museum.

These warbirds – from a legendary British Spitfire MkIXc that flew 74 missions in World War II including over the beaches of Normandy on D-Day to four P-51s, a C-53, a Canadian Harvard Mk IV and an FM-2P Wildcat.

The planes are owned by Bruce Eames of Houston, Texas, and housed at the Dakota Territory Air Museum in Minot. Minot Aero Center does the maintenance on the planes.

Warren Pietsch, Minot, is the chief pilot of the fleet and also a Dakota Territory Air Museum board member.

An Interstate L-6 Cadet “Grasshopper,” a utility transport, liaison and observer plane used during World War II owned by Cindy Beck of Wahpeton, also is at the museum.

The collection of warbirds being in Minot got its start when Dr. Hank Reichert of Bismarck, owner of a P-51 Mustang “Dakota Kid II, “ displayed the plane at the Minot museum.

“Dr. Reichert had allowed us to use ‘Dakota Kid’ for a number of years,” said Pietsch.

When Reichert decided to sell his plane, he asked Pietsch to sell it for him. “People from Houston saw the ad and came here with the intent of buying that airplane – only that airplane – and to have me fly it in four air shows a year for two years. At the end of that period they were going to donate the plane back to the air museum,” Pietsch said.

“They came here, we had lunch and they saw what we were doing for kids’ educational programs and for honoring veterans. They thought that was pretty neat,” he said.

Pietsch took the Mustang to Houston to fly the first air show that fall. Ed Bosarge of Houston bought ‘Dakota Kid’ and another plane, a Japanese Zero. Bruce Eames, also of Houston, bought “Little Horse,” another P-51, at the same time.

“They got pretty enthused and we had a museum in Houston that we were in. That went on from 2010 until now,” Pietsch said. He said the hangar in Houston has been sold and Bosarge has decided to direct his interest elsewhere and has sold all of his planes except one which is being sold. The rest of the airplanes belong to Eames.

The Houston group also contributed along with the city of Minot to building the hangar, said Pietsch, referring to the hangar in Minot that houses the warbirds.

“We did a fundraiser and got half a million dollars from the city of Minot. They told me for every dollar I raised they’d give me two so that’s how we built this hangar. They (Houston group) paid for two-thirds of it,” Pietsch said. The hangar was dedicated July 4, 2013.

The planes have participated in air shows all over the country.

“We did a lot of air shows – in the Caribbean, Oshkosh… – all the major air shows in the country for the last seven, eight years,” Pietsch said, adding, “This collection of airplanes is probably the largest collection of World War II aircraft in one spot in the central U.S.”

Along with many air shows, the planes and pilots were in special observances including a 70th anniversary of Victory in Europe (V-E Day) commemoration in Washington, D.C., in May 2015.

When people visit the museum in Minot, Pietsch said they are quite surprised what they see there.

“People are amazed when they come in here – people in the industry and others just never expect to see what they see when they come to Minot and see this museum,” Pietsch said. He said the warbirds are part of it. “But the facility is beautiful, the people here – the volunteers and the workers here – do a great job in keeping the place nice and that has helped us maintain this fleet and have the people from Houston willing to leave their airplanes here plus we don’t have hurricanes.”

All of the World War II planes at the museum are flyable.

“Some of them have actual war history,” Pietsch said. “The Spitfire flew 74 missions in World War II. It was flown by the Polish Volunteers in the RAF, and then transferred to the Free French and flew over Normandy Beach during the invasion. It’s an extremely historic airplane,” he said.

Warren Pietsch, pilot, with passenger Brinlee Sisk, Dakota Territory Air Museum staff member, prepare to leave the air museum in “Little Horse,” a P-51 Mustang, for a flight over Minot on May 8. The flight, presented by the air museum, was done in commemoration of the 75th anniversary of Victory in Europe (V-E) Day and to honor front-line medical workers and other essential workers during the COVID-19 pandemic. “Little Horse” is one of several World War II planes at the air museum.

Photos Courtesy of North Dakota Air National Guard.

The Fargo Air Museum recently received a MQ-1 Predator remotely piloted aircraft (RPA), which was originally a North Dakota Air National Guard (NDANG) aircraft, on loan from the National Museum of the U.S. Air Force (NMUSAF). The 119th Wing, known as the Happy Hooligans, operated the MQ-1 Predator from 2007 until 2018, when it was replaced with the MQ-9 Reaper. 

You may have seen the MQ-1 Predator flying around town for training purposes in years past, but now you can see one up-close and personal. 

The Fargo Air Museum was granted full civilian museum certification from the NMUSAF in December of 2018, which allows it to request loans of aerospace vehicles for display. The certification, coupled with the ongoing, positive relationship with the NDANG, makes this a very special addition to the museum. “We are very excited and thankful to the North Dakota Air Guard for its continuous support of the Fargo Air Museum,” said Ryan Thayer, Executive Director. “Having this aircraft on display will allow us the opportunity to educate the public on the role of RPAs and the 119th Wing’s mission. We look forward to continuing our partnership with the Happy Hooligans and are also actively working to assist with recruiting efforts.” 

The MQ-1 Predator is operated by a crew, consisting of a pilot and a sensor operator, from a ground control station (GCS). The aircraft stands 7 feet tall, measures 27 feet in length and has a wingspan of 48 feet 7 inches. Although equipped with surveillance technology for the primary purpose of reconnaissance, the Predator can also be armed for light attack in warzones. To protect the legal rights of U.S. citizens, surveillance technology on U.S. Air Force RPAs is not used during training sorties over non Department of Defense controlled territory.

The Fargo Air Museum was founded with the nonprofit mission of promoting aviation through education, preservation and restoration. Located on 19th Ave N, just east of Interstate-29, the Fargo Air Museum is home to aircraft of all eras. Visit www.fargoairmuseum.org for additional information. 

The North Dakota Air National Guard is a trained and highly motivated force of about 1,100 Citizen-Airmen executing world class MQ-9 precision attack and reconnaissance, kinetic and non-kinetic target intelligence production, and expeditionary support capabilities for the nation and state.

By Jason Myrvik, Midland Door Solutions General Manager

It’s a beautiful day for flying. The flight plan is filed and airplane checks are done. A push of a button and the hangar door will open to the airfield. 

That’s how it should happen. But, without regular maintenance checks, there could be a headache ahead rather than blue skies.

As with any moving piece of equipment, regular hangar door maintenance checks and services will prevent problems and the downtime and expense that come with them. After all, it’s much cheaper and faster to prevent a problem than to fix one. These tips will help do just that. 

Take a wide-angle view. Before each use, look over the whole door for any damage. Ensure the hinges, rollers and structure all appear serviceable.

Examine the movement mechanisms. On bi-fold doors, ensure the cables or straps track correctly over the drum before each use. Each month do a closer visual inspection of the cables or straps to look for frays, tears or breaks. Check the cable tension by pulling each away from the door while it’s closed, ensuring the straps are equally taut. Confirm, too, that the cables or straps hold the door in a straight, vertical position when it’s closed. If any adjustments are needed, be sure to do it while the door remains closed. For hydraulic doors, inspect the lines, hoses and cylinders for leaks, and repair anything that’s out of spec. 

Grease and oil. Each year grease the door’s operating mechanism and lubricate the hinges. On hydraulic doors also check the oil reservoir before operation and, if it’s low, refill with hydraulic fluid. Also inspect the gearbox fluid level and drive chains for proper alignment. If the gearbox is low on lube, check that none of the seals are leaking, and then follow the manufacturer’s instructions for viscosity and quantity of gear lube. The drive chains should be lubricated every six months, if needed.

Latch on to durability. If the door does not have automatic latches, make sure the manual ones fully disengage before opening. Some manufacturers simplify this maintenance point by using a single manual latch rather than two. No matter the number or style, ensure the latches remain tight against the door jamb, which will prevent potential injury or damage in strong winds.

Look and listen. When opening and closing the door, watch the motor and brakes to ensure both are not over-working or dragging. Listen for anything that sounds different from the norm. If something sounds off, consult the owner’s manual or call the dealer or manufacturer.

Put the brakes on. While closing the door, hit stop when it’s 4 or 5 feet from the ground and observe if it stops right away or coasts a few inches. Over time, the gearbox teeth can wear and cause the door to continue to move. If the door coasts 3 inches or more, a brake system will need to be maintained or added. 

Keep it taut and tight. On bi-fold doors, look over the belts, sprockets, chains and chain links each month for damage, ensuring everything is properly aligned and tensioned. If it’s not, contact a dealer for service. For hydraulic doors, inspect the fittings on the hydraulic lines and hoses every three months to ensure they are tight. Also check the hydraulic pressure during operation. On both door styles, ensure receivers and remotes are undamaged.

Don’t skimp on the opening. The limit switch, which controls where the door stops when opened or closed, may need to be reset occasionally if the door stops just shy of closing or doesn’t go up all of the way. Manufacturers typically provide adjustment instructions in operator’s manuals, but some manufacturers ensure it’s at the user’s fingertips, placing the instructions under the control box cover. If the limits are off, avoid slippage by ensuring that the control box sprocket screw is tight and the chain tension is correct. For added safety, use override switches that will stop the door from moving past its fully open point should the limit switch fail. 

Check on safety. Look over the safety guards and shields every to ensure they are installed correctly over the operating system’s lifting drums, chains and sprockets as well as over the automatic latch components. If the door uses manual latches, test them by holding the switch while attempting to open the door; the door should not move. Also, ensure all safety decals are still in place and readable. 

Keep an eye on it. Regularly clean the photo eyes and sensing edges, which detect objects in the door’s path, to ensure the door continues to open smoothly.

Just like any other piece of equipment, repairs tend to be needed more frequently as a door ages. If repairs are needed every six to 12 months, it will be worthwhile and more cost-efficient to explore purchasing a new door. When that time comes, work with an experienced manufacturer that will manage the entire process, from carefully checking the building’s specs and providing a design and accurate estimate to engineering a safe, all-steel door to fit the opening. Their service should not end there but should continue through the installation and finish work as well as after-sale check-ins to address any concerns. 

When choosing a new door, ask about maintenance-friendly options and modern conveniences, such as override systems, high wind-load ratings, automatic latches, brake systems, insulation and door liners, photo eyes, sensing edges, walk-through doors and windows and variable speed drive systems.

Whether new or old, periodic checks will ensure the hangar door operates safely and efficiently for years to come.